Division 05 · eei-canamrockdrill.com
EEI CanAm Excavator Hydraulic Rock Drills & RockMore Tooling
CanAm Excavator-Mounted Screw Air Compressor Flushing Kit
Pneumatic drifter system (Model SAL67M / diagram AL67MQ1) and associated excavator-mounted air flushing hardware compatible with compact excavators such as the Takeuchi TB135, featuring lateral feed swing, side-mounted hydraulic controls, and quick-disconnect lines.
↓ Download Air Attachment Spec Brochure (3.1 MB PDF)| Parameter | Specification |
|---|---|
| Pneumatic Drifter Model | SAL67M (Diagram AL67MQ1) |
| Example Base Carrier Shown | Takeuchi TB135 |
| Rotation Rate | 1 in 30 Upstroke |
| Cylinder Bore (Imperial) | 3 1/4 in |
| Cylinder Bore (Metric) | 82.5 mm |
| Cylinder Stroke (Imperial) | 2 1/2 in |
| Cylinder Stroke (Metric) | 63.5 mm |
| Chuck Size (Imperial) | 1 in or 7/8 in hex 4 1/4 in |
| Chuck Size (Metric) | 1 in or 7/8 in hex 108 mm |
| Machine Weight (Imperial) | 101 lb (Drifter bare) / 600 lbs (Complete Unit) |
| Machine Weight (Metric) | 45.7 kg (Drifter bare) |
| Air Consumption (Imperial) | 228 cfm @ 90 psi |
| Air Consumption (Metric) | 6.46 m3/min @ 6.2 bar |
| Feed Swing Range | 20 Degrees Left & Right |
| Flushing Modes | Wet or Dry |
| Hydraulic and Feed Controls | Located directly on side of feed assembly with integrated feed pressure gauge |
| Connection Type | Quick disconnect system for pneumatic and hydraulic lines |